Home > Knowledge > Content

How do you adjust a squeaky chainsaw?

- Jan 12, 2018 -

How do you adjust a squeaky chainsaw?


Always check your chain tension before cutting. If the flats on the chain hang around of the bar groove, it wants to adjust. And new chains ought to break in, therefore make sure to regulate your gas or electrical sawing machine at intervals the primary five cuts.

Important reminders before checking tension
-Ensure sawing machine is off and chain is stopped
-Wear gloves
How to modify Chain Tension:

1. Loosen bar-retaining bonkers – don't take away

2. Holding guide bar tip up, flip tensioning screw right-handed – correct tension depends on the chain temperature.

Cold Chain Tensioning: If you haven’t started cutting nevertheless, the chain ought to work cozy against the undersurface of the guide bar.

3. when adjusting, raise the tip of the guide bar up to see the strain.
– If it’s still too loose, unharness the tip of the guide bar {and flip|and switch} the tensioning screw a 0.5 turn right-handed. Repeat as required.
– If it’s too tight, the chain won’t rotate. therefore flip the tensioning screw 1 / 4 flip counterclockwise. you ought to be ready to flip the chain by hand while not binding.
After adjusting, raise the tip of the guide bar up to see the strain.

4. once you have the correct tension, hold the tip of the guide bar up and tighten the retentive bonkers copy.

5800.jpg

Related Industry Knowledge

Related Products

  • 40cc Forest Operation Gas Chain Saw
  • Oregon Gas Steel Chainsaw
  • Professional Steel Chainsaw
  • Small Oregon Chainsaw with 25cc
  • Oregon Chainsaw CS5200
  • Big Power Oregon Chainsaw