Home > Knowledge > Content

Storage for daily maintenance

- Aug 27, 2018 -

Storage for daily maintenance

After each work, clean the machine, check whether the working parts are loose and tighten in time.

The air filter element shall be checked frequently. When the machine is felt weak or difficult to start, the cleaning filter, paper filter element shall be blown dust or knocked out by the fan. The sponge filter element can be cleaned by soap and water or other detergents and installed after drying.
After working 50 hours normally, should replace new filter core.

Butter the gear box for 25 hours, and butter the upper part of the drive shaft and the junction of the clutch plate.

If the gasoline engine is not in use for a long time, it needs to be sealed. The method is as follows: clean the outside, empty the fuel tank, start the engine until automatic flameout (empty the fuel in the carburetor), remove the spark plug, add 1-2ml two-stroke oil to the cylinder, pull the starting line for 2-3 times, and install the spark plug.
Wrap the vent with oil paper and rope (to prevent foreign matter and moisture) and store it in the store after filling with butter.


Quote from:www.toutiao.com

Related Industry Knowledge

Related Products

  • Best 35.8cc High Quality Brush Cutter
  • Wood Cutting Gasoline 22in Chainsaw
  • Professional Design 58cc Gas Chainsaw
  • Professional-grade 40cc Gas Chainsaw
  • Automatic Portable Brush Cutter
  • Self Portable Brush Cutter