Home > News > Content

Maintenance Of Lawn Mower

- Jul 13, 2018 -

Maintenance of lawn mower

cg35.JPG

1. Frequently replace vulnerable parts, improve equipment performance, make it a habit to check key parts of the mower frequently, and replace parts as required.
Special attention should be paid to the engine and blade, the damaged blade is easy to cause safety hazards in the work.
When necessary, consider replacing the fuel filters, spark plugs, and air filters of the equipment, and cleaning the air filters from time to time.

2, thoroughly clean the bottom of the lawn mower, deck and the cap before any maintenance, first remove the spark plug wire and open the device, hose, putty knife, automobile cleaner remove accumulation of material from the landing gear and deck.
The cover of the tank is provided with an air hole, which is to allow air to enter the tank. The particles deposited on the tank are removed with a brush to prevent the air from blocking the air hole.
Then close the cap and check if there is any obstruction. If there is any, it is recommended to replace the cap.

3, remove oily be soiled, spray degreasing agent on the first equipment there is oily be soiled, let stand for 10 minutes to 15 minutes, let the degreasing agent and oil react adequately, after it with a towel to wipe clean, finally to fully flush with the plastic pipe.
Spray lubricant is used to spray the exposed parts of the lawn mower to prevent rust.

Do not forget to clean and maintain the lawn mower after use to extend the service life of the machine.
When using, also pay attention to safety and check in advance.
If you have bought the lawn mower and its accessories or have any questions, please contact us.

DSC_2538.JPG

Quote from:www.toutiao.com

Related News

Related Products

  • 40-cc 2-cycle 16-in Petrol Chainsaw
  • Mini Gas Powered Chain Saw
  • Small Gas Garden Chain Saw
  • Steel Chainsaw 58cc
  • 58cc Gas Steel Chainsaw
  • Showbull Oregon Chainsaw with 58cc